ATTs Magnesium Scandium Master Alloy

ATTs Magnesium Scandium Master Alloy

During the production of aluminum alloys, master alloys are used to adjust the microstructure of the final product.mgsc master alloy These are mixtures of pure aluminum and specific alloying elements such as copper, magnesium, and zinc. These are heated to a high temperature and poured into molds where they solidify. The master alloy is then cut into pieces that can be added to a larger melt of pure aluminum in order to achieve the desired characteristics of the final metal.

This process is typically performed in a controlled environment to ensure a consistent distribution of the additives in the melt.mgsc master alloy This is important for ensuring the properties of the final metal will be accurate. This process is used to create a wide range of different metal products including castings, extrusions, and forgings.

Using a Master Alloy is a cost-effective way to add these specific alloying elements to the aluminum melt.mgsc master alloy In addition, it is also a safer way to do this as it requires less handling of the raw material. This will reduce the risk of contamination from impurities that can occur when adding small amounts of pure alloying elements individually to the melt.

In addition, the use of a Master Alloy can help to save time in the production process.mgsc master alloy By adding the alloying element to a master alloy and then pouring it into the aluminum melt, you can get a more precise mixture. This will make the process much quicker and easier.

The tensile test results shown in Figure 7 indicate that the master alloy showed good mechanical properties at elevated temperatures. The elongation increased with increasing temperature. This is likely due to the elastic hardening and chemical-structural coupling effects from the addition of the MgSc. In addition, the MgSc did not exhibit any coarsening of the strengthening particles after heat treatment.

These results show that the Mg-MgSc alloy exhibited improved mechanical properties at elevated temperatures, which is a useful property for applications requiring this type of metal. In addition, the Mg-MgSc alloy also showed excellent corrosion resistance.

ATTs’ Magnesium Scandium Master Alloy is available in bulk quantities from palletized plastic 5 gallon/25 kg pails to fiber and steel drums up to 1 ton super sacks in full container load (FCL) or truck load (TL) quantities. Research and sample quantities as well as hygroscopic, oxidizing or air sensitive materials may be packaged under argon or vacuum for safe shipment. Upon request, a custom package can be provided for special requirements.